Operator`s manual

37
/
91
11 CUTTING, COPYING AND PASTING LINES
11.1 Cutting a Ladder Diagram Line
Cut the line selected in the “ladder preview” display. The ladder information of the
cut line can be pasted to another line by pressing [Paste Rung] or [Insert Cut/Copied
Rung].
[How to Operate]
Select the line to be cut in the “ladder preview” display, and select [Edit] –
[Cut Rung]. Or select
from the main tool bar (refer to “26.2.1 Main Tool
Bar”).
To select several lines simultaneously, hold down the [SHIFT] or [CTRL] key
when selecting lines.
11.2 Copy a Ladder Diagram Line
Copy the line selected in the “ladder preview” display. The ladder information of the
copied line can be pasted onto another line by pressing [Paste Rung] or [Insert
Cut/Copied Rung].
[How to Operate]
Select the line to be copied in the “ladder preview” display. Then select [Edit]
– [Copy Rung] menu. Or select
from the main tool bar (refer to “26.2.1
Main Tool Bar”).
To select several lines simultaneously, hold down the [SHIFT] or [CTRL] key
when selecting lines.
11.3 Pasting a Ladder Diagram Line
Paste the cut or copied contents of the line by pressing [Cut Rung] or [Copy Rung]
over the line selected in the “ladder preview” display.
When several ladder list files are open simultaneously, the ladder diagram can be
pasted onto another ladder list file.