Operator`s manual

36
/
91
10 LINE OPERATION OF LADDER DIAGRAM
Be sure to select [Overwrite] or [Insert] for the contents edited in the “ladder editing”
display before editing another line. Without this operation, the contents edited
immediately before will be deleted. Ladder Editor 32NX checks the ladder
information that is being currently edited when another line appears. If the
[Overwrite] or [Insert] is not selected, an editing confirmation message appears.
(Refer to “23.7 Automatic Updating Function”.)
Fig. 10-1 [Auto Save Current Rung: Ask Before Saving Option] Dialog Box
Normally, the operator uses the menu or tool button to perform [Overwrite] or [Insert].
10.1 Changing an Edited Ladder Line
Overwrite the contents edited in the “ladder editing” display on the line currently
being edited, in the following manner.
[How to Operate]
Select [Edit] – [Save Current Rung] – [Overwrite], or select
from the main
tool bar (refer to “26.2.1 Main Tool Bar”).
10.2 Inserting an Edited Ladder Line
Insert the contents edited in the “ladder editing” display into the next line of the line
currently being edited, in the following manner. Therefore, the ladder data after the
inserting line will be shifted backward.
[How to Operate]
Select [Edit] – [Save Current Rung] – [Insert], or select
from the main tool
bar (refer to “26.2.1 Main Tool Bar”).