Operator`s manual

30
/
91
2. Edit the name.
Edit the displayed name for a relay No. or register No. in the [Edit Labels
and Commonts] dialog box.
8.8 Inserting Editing Matrix Row and Line
Even though new ladder parts are to be inserted immediately before the ladder parts
that have already been set, there may be no matrix for insertion as shown in the
following diagram (Fig. 8-9).
Fig. 8-9 When No Space for Matrix
In this case, insert a line (or a row) to secure the matrix where the ladder parts are
to be inserted.
8.8.1 Inserting a Row
Insert a row in the following manner.
[How to Operate]
1. Enter the row insertion mode.
Select [Tool] – [Edit Instructions] – [Edit Entire Row] – [Insert Row].
Or select
from the parts control tool bar (refer to “26.2.2 Parts Control
Tool Bar”).
2. Specify the matrix where a row is to be inserted.
Left-click the mouse on the matrix where a row is to be inserted.
To be inserted here