Operator`s manual

28
/
91
[How to Operate]
1. Right-click the mouse on the ladder parts to which the set values are input,
and select the pop-up menu.
Right-click the mouse on the ladder parts to which the set values are
input in the “ladder editing” display, and the pop-up menu appears.
Select the [Edit Instruction Parameters], and the [Input Value] dialog box
appears.
2. Input the set values.
Input the set values in the [Input Value] dialog box.
8.7 Inputting Relay No. and Register No. Names
Names can be set for the relay Nos. and register Nos.. When editing name, a new
name can be input or name information read from the external name file can be
edited. Set the name for a relay No. or a register No. in the following manner.
[How to Operate]
1. Enter the name input mode.
Select [Tool] – [Edit Instruction] – [Edit Labels and Commonts], or select
from the parts control tool bar (refer to “26.2.2 Parts Control Tool Bar”).
2. Select the ladder parts where the number of the name to be selected is set.
Left-click
the mouse on the ladder parts where the number of the name to be
selected is set in the “ladder editing” display, and the [Edit Labels and
Commonts] dialog box appears.
Fig. 8-8 [Edit Labels and Commonts] Dialog Box