Operator`s manual

Two parts are connected by a drag and drop operation.

Step1

Step2 Step3

Fig. 8-3 Line Connection Process

 Ladder Parts Connection Terminals

Ladder parts have IN and OUT terminals. A connecting line connects the

IN and OUT terminals. A drop and drag operation determines which are

IN and which are OUT terminals and connects them automatically.

However, when two connection ladder parts are placed vertically as shown

in Fig. 8-4, the user must decide to connect the IN or OUT side.

Fig. 8-4 When Parts are Placed Vertically

In Fig. 8-5, the mouse pointer is dragged from the center of a ladder part

and dropped on the IN side of the other part, to make the connecting line on

the IN side.

Dropping on the IN side makes a line which connects to the IN side of the

other ladder part. On the other hand, dropping on the OUT side makes a

line which connects to the other OUT side.