Operator`s manual

22
/
91
8 EDITING A LADDER DIAGRAM
All ladder diagrams are edited in the “Basic” Display shown in Fig. 3-1.
8.1 Ladder Parts Specifications
The Ladder Editor 32NX supports the ladder parts corresponding to the new ladder
codes employed for the NX100.
For the details on such ladder parts, refer to the [Ladder Parts Specifications] of
[Help] menu.
8.2 Selecting a Ladder Edited Line
A ladder diagram is edited in the “ladder editing” display, and the line to be
displayed in the “ladder editing” display is selected in the “ladder preview” display
(Fig. 8-1 ). In the “ladder preview” display, images of the ladder diagrams of all the
lines can be viewed set in the current ladder section (either system section or user
section).
Fig. 8-1 “Ladder Preview” Display
Scroll bar
Ladder diagram
image at 18
th
line