Operator`s manual

5. Click the [Install] button and set “setup.exe”following the instructions in the

display.

Fig. 2-2 “Setup Program Setting” Display

6. Clicking the [Finish] button starts up the setup program. Proceed by following

the instructions in the display.

7. When setup is completed, [Ladder Editor 32NX] is registered in [Start] –

[Program] – [Motoman] – [Ladder Editor 32NX] group.

Note: If Ladder Editor 32NX must be installed again for some reason, re-install it

after selecting [Ladder Editor 32NX] in [Add/Remove Application] in the

“Add/Remove Application” display (Fig. 2-1 ), and deleting all the files of the

Ladder Editor 32NX application.