Operator`s manual

2.1 I/O Instructions
2-16
ARATION
Instruction set:
Starts the analog output corresponding to the speed.
ARATION is valid during linear interpolation, circular interpolation, and spline interpolation.
ARTION is carried out during playback or FWD operation, but not while operating an axis.
1. AO# (Analog output port number)
Add the following tag.
2. BV=Basic voltage
The following tag can be added or omitted.
SUBSET STANDARD EXPANDED
Not available Available Available
No. Tag Explanation Note
1
AO# (Analog out-
put port number)
Specifies the number of the analog output port
that outputs the voltage corresponding to the
speed.
No.: 1 to 40
Variable B/I/D/LB/LI/
LD can be used.
No. Tag Explanation Note
2
BV=Basic voltage Specifies the voltage to be output when running
at the speed set in part 3 of this Explanation.
Voltage value:
-14.00 to +14.00 V
Variable I/LI/I[]/LI[]
can be used.
(Units: 0.01 V)
Function
Construction
ARATION
AO#
(
Analog output
port No.
)
END
A
A
V=
Speed at TCP
(mm/sec.)
BV=
Basic voltage
(V)
OFV=
Offset voltage
(V)
1
2
3 4
Explanation