Operator`s manual

2.10 General-purpose Instruction
2-274
TOOLOF
For general-purpose applications
Instruction set:
Turns OFF the work instruction.
1. TOOL1/TOOL2/TOOL3
Choose one of the tags from the following table. These tags are valid for a system with multi-
ple applications in which two or more general-purpose applications are included. These tags
are not displayed when there is only one application.
TOOLOF
Turns OFF the work instruction.
Turns ON the work end instruction (dedicated output relay #50771) and waits for the work end
response (dedicated input relay #40571). When the work end response is turned ON, the
next instruction is carried out.
The work end response relay is designed to turn ON immediately after the output of the work
end instruction.
SUBSET STANDARD EXPANDED
Available Available Available
No. Tag Explanation Note
1
TOOL1 Specifies Tool 1.
2
TOOL2 Specifies Tool 2.
3
TOOL3 Specifies Tool 2.
Function
Construction
TOOL1
TOOL2
ENDTOOLOF
1
2
TOOL3
3
Explanation
Example