Operator`s manual

2.9 Spot Welding Instruction
2-267
4. GUN# (Gun 2 number)
The following tag can be added or omitted.
5. MODE=Gun 2 operation mode
When a Gun 2 number (GUN#) is selected from the table in part 4 of this Explanation, add the
following tag.
6. WTM=Gun 2 welding condition
When a Gun 2 number (GUN#) is selected from the table in part 4 of this Explanation, add the
following tag after MODE=Gun 2 operation mode is selected from the table in part 5 of this
Explanation.
No. Tag Explanation Note
4
Gun 2 number Specifies the number of the air gun used for
welding.
For a 2-gun welding system, specify the number
of the second air gun.
No.: 1 to 8
Variable B/I/D/LB/LI/
LD can be used.
No. Tag Explanation Note
5
MODE=Gun2
operation mode
Specifies the operation mode of the air gun.
For a 2-gun welding system, specify the opera-
tion mode of the second air gun.
Mode: 0 to 4
Variable B/B[]/LB/
LB[]/I/I[]/LI/LI[]/D/D[]/
LD/LD[] can be used.
No. Tag Explanation Note
6
WTM=Gun 2
welding condition
Specifies the welding condition number set for
the welder.
For a 2-gun welding system, specify the welding
condition number for the second air gun.
Condition No.: 1 to
255
Variable B/B[]/LB/
LB[]/I/I[]/LI/LI[]/D/D[]/
LD/LD[] can be used.