Operator`s manual

2.9 Spot Welding Instruction
2-265
SPOT
For spot welding applications
Instruction set:
Starts the welding sequence after pressure has been applied to the air gun.
1. GUN# (Gun 1 number)
Add the following tag.
SUBSET STANDARD EXPANDED
Available Available Available
No. Tag Explanation Note
1
GUN# (Gun 1
number)
Specifies the number of the air gun to be used
for welding.
For a 2-gun system, specify the number of the
first air gun.
No.: 1 to 8
Variable B/I/D/LB/LI/
LD can be used.
Function
Construction
SPOT 1 GUN# Gun 1 number( ) MODE=
Gun 1 operation
mode
2
GUN# Gun 2 number4
A
A
WTM=
Gun 1 welding
conditions
3
ATT=
Anticipation time
(s)
7
END
D
B C
B CMODE=
Gun 2 operation
mode
5 WTM=
Gun 2 welding
conditions
6
D
Explanation