Operator`s manual

2.9 Spot Welding Instruction
2-263
2.9 Spot Welding Instruction
GUNCL
For spot welding applications
Instruction set:
Applies pressure to the air gun.
1. GUN# (Gun number)
Add the following tag.
2. T=Time
Add the following tag.
SUBSET STANDARD EXPANDED
Available Available Available
No. Tag Explanation Note
1
GUN# (Gun num-
ber)
Specifies the number of the air gun to which
pressure is applied.
No.: 1 to 8
Variable B/I/D/LB/LI/
LD can be used.
No. Tag Explanation Note
2
T=Gun pressure
time
Specifies the time during which the air gun is
closed.
Units: seconds
Variable I/LI/I[]/LI[]
can be used.
(Units: 0.01 seconds)
Function
Construction
GUNCL
1
GUN#
Gun No.
( ) T=
Gun pressure
time (s)
2
ATT=
Anticipation
time (s)
3
A
A
END
Explanation