Operator`s manual

2.8 Handling Instruction
2-259
2.8 Handling Instruction
HAND
For handling applications
Instruction set:
Turns the signal to the tool valve ON or OFF to control the tool.
1. UNIT1/UNIT2/UNIT3/UNIT4
Choose one of the tags from the following table. These tags are valid for a system with multi-
ple applications in which two or more handling applications are included. These tags are not
displayed when there is only one application
.
SUBSET STANDARD EXPANDED
Available Available Available
No. Tag Explanation Note
1
UNIT1 Specifies Device No. 1.
2
UNIT2 Specifies Device No. 2.
3
UNIT3 Specifies Device No. 3.
4
UNIT4 Specifies Device No. 4.
Function
Construction
UNIT1
UNIT2
A
END
HAND
1
2
8
UNIT3
3
Hand No.
B/LB/B[]/
LB[]
Variable No.
ON/OFF
5 6
7
A
ALLUNIT4
4
Explanation