Operator`s manual

2.7 Arc Welding Instruction
2-254
(1) ARCCTS AC=150 AV=16.0 DIS=100.0
MOVL V=80
To make the welding current =150A and arc voltage =16V, the current and the volt-
age are changed in the section of 100mm from the move start point.
Gradually Decreasing Current or Voltage
Gradually Increasing Current or Voltage
(2) ARCCTS AC=150 AV=16.0 AN3=7.50 AN4=6.50 DIS=100.0
To make the welding current =150A, arc voltage =16V, aimed value =7.5V of the
instruction voltage to analog output 3, and aimed value =6.5V of the instruction volt-
age to analog output 4, the current and the voltage are changed in the section of
100mm from the move start point.
Example
Value immediately before execution
 of move instruction
ARCCTS aimed value
ARCCTSexecuted
Welding continues
DIS =100
Move distance specified
by move instruction
Value
 immediately before
execution of move instruction
ARCCTS aimed value
ARCCTSexecuted
Welding continues
DIS=100
Move distance specified
by move instruction