Operator`s manual

2.7 Arc Welding Instruction
2-252
1. WELD1/WELD2/WELD3/WELD4
Choose one of the tags from the following table. These tags are valid for a system with multi-
ple applications in which two or more arc welding applications are included. These tags are
not displayed when there is only one application.
2. AC=Current output value
The following tag can be added or omitted.
3. AV=Voltage output value /AVP=Ratio to proper voltage output value
Choose one of the tags from following table.
No Tag Explanation Note
1
WELD1 Specifies Welder 1.
2
WELD2 Specifies Welder 2.
3
WELD3 Specifies Welder 3
4
WELD4 Specifies Welder 4
No Tag Explanation Note
5
AC=Current out-
put value
Specifies the aimed value of the welding current. Current value: 1 to
999A
Variable B/I/D/B[]/I[]/
D[]/LB/LI/LD/LB[]/
LI[]/LD[] can be used.
No Tag Explanation Note
6
AV=Voltage out-
put value
Specifies the aimed value of the welding voltage. Voltage value: 0.1 V
to 50.0 V
Variable B/I/D/B[]/I[]/
D[]/LB/LI/LD/LB[]/
LI[]/LD[] can be used.
(Units: 0.1 V)
7
AVP=Ratio to
proper voltage
output value
Specifies the aimed value for the welding voltage
in the ratio to the proper voltage output value.
Ratio: 50% to 150%
Variable B/I/D/B[]/I[]/
D[]/LB/LI/LD/LB[]/
LI[]/LD[] can be used.
Explanation