Operator`s manual

2.1 I/O Instructions
2-5
2. IN#(Input number) / IG#(Input group number) / OT#(Output number) /
OG#(Output group number) / SIN#(Specific input number) / SOUT#(Spe-
cific output number) / IGH#(Input group number) / OGH#(Output group
number)
Choose one of the tags from the following table.
No Tag Explanation Note
2
IN#(Input num-
ber)
Specifies the general input signal number which
shows the signal status.
No:1 to 1024
Variable B/I/D/LB/LI/
LD can be used.
3
IG#(Input group
number)
Specifies the general input group signal number
(1 group 8 points) which shows the signal status.
No:1 to 128
Variable B/I/D/LB/LI/
LD can be used.
4
OT#(Output num-
ber)
Specifies the general output signal number
which shows the signal status.
No:1 to 1024
Variable B/I/D/LB/LI/
LD can be used.
5
OG#(Output
group number)
Specifies the general output group signal num-
ber (1 group 8 points) which shows the signal
status.
No:1 to 128
Variable B/I/D/LB/LI/
LD can be used.
6
SIN#(Specific
input number)
Specifies the specific input signal number which
shows the signal status.
No:1 to 640
Variable B/I/D/LB/LI/
LD can be used.
7
SOUT#(Specific
output number)
Specifies the specific output signal number
which shows the signal status.
No:1 to 800
Variable B/I/D/LB/LI/
LD can be used.
8
IGH#(Input group
number)
Specifies the general input group number (1
group 4 points) signal which shows the signal
status.
No:1 to 256
Variable B/I/D/LB/LI/
LD can be used.
9
OGH#(Output
group number)
Specifies the number of general output group (1
group 4 points) signal which shows the signal
status.
No:1 to 256
Variable B/I/D/LB/LI/
LD can be used.
Input signal
Input signal IN#(xx) is 1 point, IGH#(xx) is 1 group 4 points, and IG#(xx) is 1group 8 points.
SUPPLE-
MENT
IN#(1)IN#(3) IN#(2)IN#(5) IN#(4)IN#(7) IN#(6)IN#(8)
IGH#(1)IGH#(2)
IG#(1)