Operator`s manual

2.6 Instruction Which Adheres to an Instruction
2-215
5. B Variable number /LB Variable number /B [Array number] /LB [Array num-
ber] /ON /OFF
When an IG#(Input group number) is selected from the table in part 1 of this Explanation,
choose one of the tags from the following table after “=” or “<>” are added from the table in
part 4 of this Explanation.
6. =/<>/>/>=/</<=
When a B Variable number, LB Variable number, B [Array number], or LB [Array number] is
selected from the table in part 1 of this Explanation, choose one of the tags from the following
table.
No Tag Explanation Note
12
B Variable num-
ber/
LB Variable num-
ber/
B [Array number]/
LB [Array num-
ber]
Specifies the byte type variable which becomes
a comparison condition.
<Comparison ele-
ment 2>
13
Byte type con-
stant
The comparison condition is specified by byte
type constant.
<Comparison ele-
ment 2>
No Tag Explanation Note
14
= It is equal.
15
<> It is not equal.
16
> It is greater than.
17
>= It is greater than or equal.
18
< It is less than.
19
<= It is less than or equal.