Operator`s manual

2.6 Instruction Which Adheres to an Instruction
2-214
2. =
When an IN#(Input number) is selected from the table in part 1 of this Explanation, add the fol-
lowing tag.
3. B Variable number /LB Variable number /B [Array number] /LB [Array num-
ber] /ON /OFF
When an IN#(Input number) is selected from the table in part 1 of this Explanation, choose
one of the tags from the following table after the equal sign (=) is added from the table in part
2 of this Explanation.
4. =/<>
When an IG#(Input group number) is selected from the table in part 1 of this Explanation,
choose one of the tags from the following table.
No Tag Explanation Note
7
= It is equal.
No Tag Explanation Note
8
B Variable num-
ber/
LB Variable num-
ber/
B [Array number]/
LB [Array num-
ber]
Specifies the byte type variable which becomes
a comparison condition.
<Comparison ele-
ment 2>
Least significant bit:
0: OFF
1: ON
9
ON/OFF The comparison condition is specified as ON or
OFF.
<Comparison ele-
ment 2>
No Tag Explanation Note
10
= It is equal.
11
<> It is not equal.