Operator`s manual

1.4 Registration of Expression
1-9
Data
The data type of the expression is indicated. The following types of data can be registered.
• Constant (byte type, integer type, double-precision type, and real-number type)
• Byte type variable (B, B[], LB, and LB[])
• Integer type variable (I, I[], LI, and LI[])
• Double-precision type variable (D, D[], LD, and LD[])
• Real-number type variable (R, R[], LR, and LR[])
Move the cursor to the desired position, and press [SELECT] to enter the numeric value
input status. Change the numeric value of the constant data and the variable number.
Change the data type by using the Data type selection icon.
Data type selection icon
Change the data type in the following manner.
Move the cursor to the data type to be changed, and press [SELECT]. A dialog box with the
selectable data types is displayed. Move the cursor to the data type to be selected and
press [SELECT].
Ending parentheses
Move the cursor to the parentheses and press [SELECT]. Each time [SELECT] is pressed,
three types of parentheses show up in the following order.
Operator
Move the cursor to the operator to be changed and press [SELECT]. The operator selec-
tion dialog box is displayed. Move the cursor to the operator to be selected and press
[SELECT].
) )) )))