Operator`s manual

2.3 Operating Instruction
2-141
2. SPR# (Sealing adjustment condition file number)/UDC# (Under-coating
adjustment condition file number)/WEV# (Weaving condition file number)/
AMF# (Arc monitor file number)
Choose one of the tags from the following table.
3. (Element number)
Add the following tag.
GETFILE D000 WEV#(1) (6)
Stores the vertical distance (PATTERN VERTICAL) in the weaving condition file number 1 in
D000.
No. Tag Explanation Note
2
SPR# (Sealing
adjustment condi-
tion file number)
Specifies the number of the sealing (spray)
adjustment condition file.
No.: 1
Variable B/I/D/LB/LI/
LD can be used.
Available only with
the optional servo
sealing gun function.
3
UDC# (Under-
coating adjust-
ment condition file
number)
Specifies the number of the under-coating
adjustment condition file.
No.: 1
Variable B/I/D/LB/LI/
LD can be used.
Available only with
the optional under-
coating function.
4
WEV# (Weaving
condition file
number)
Specifies the number of the weaving condition
file.
No.: 1 to 16
Variable B/I/D/LB/LI/
LD can be used.
5
AMF# (Arc moni-
tor file number)
Specifies the number of the arc monitor file. No.: 1 to 50
Variable B/I/D/LB/LI/
LD can be used.
Available only with
the optional arc mon-
itor function.
No. Tag Explanation Note
6
(Element number) Specifies the element number of the condition
file data to be stored.
Element No.: 1 to
255
Variable B/LB can be
used.
Example