Operator`s manual

2.3 Operating Instruction
2-109
MFRAME
Instruction set:
Creates the user coordinates according to three types of position data; Data 1, Data 2, and
Data 3.
Data 1 indicates the position data of the defined point ORG; Data 2 indicates the position data
of the defined point XX; and Data 3 indicates the position data of the defined point XY.
MFRAME User coordinate designation <Data 1> <Data 2> <Data 3>
1. UF# (User coordinate number)/P Variable number/LP Variable number/P
[Array number]/LP [Array number]
Choose one of the tags from the following table.
SUBSET STANDARD EXPANDED
Not available Available Available
No. Tag Explanation Note
1
UF# (User coordi-
nate number)
Allocates the number for the user coordinate to
be created.
No.: 1 to 24
Variable B/I/D/LB/LI/
LD can be used.
2
P Variable num-
ber/
LP Variable num-
ber/
P [Array number]/
LP [Array num-
ber]
Specifies the number of the position type vari-
able where the coordinate values of the user
coordinate to be created is stored.
Function
Construction
MFRAME
PX/PX[]
/LPX
/LPX[]
Variable No.
UF# (
User
coordinate No.
) A
END A
1
2
3
P/LP/P[]/
LP[]
Variable No.
5
PX/PX[]
/LPX
/LPX[]
Variable No.
4
PX/PX[]
/LPX
/LPX[]
Variable No.
Explanation