Operator`s manual

1.2 Registration of Instructions
1-5
1.2.2 Learning Function
With the learning function, an instruction can be registered with the same additional items as
those previously registered with the instruction.
Validate the learning function to minimize the number of instruction registries.
Set the learning function to valid or invalid in the teaching condition window.
5
Select the desired instruction The instruction is displayed in the input buffer line.
6 Press [ENTER] The instruction displayed in the input buffer line is registered in
the job.
Also, if the instruction must be registered during the job, press
[INSERT] before pressing [ENTER]
Refer to the Operator’s Manual “5.2 Editing Instructions” for details on editing instructions.
Operation Explanation
1
Select {SETUP} under the
main menu
2 Select {TEACHING COND} The teaching condition window appears.
3 Move the cursor to “INSTRUC-
TION INPUT LEARNING”
Operation Explanation
SUPPLE-
MENT
DATA
EDIT
DISPLAY
UTILITY
MainMenu
ShortCut
TEACHINGCONDITION
MRESET
RECT/CYLINDRICAL
LANGUAGELEVEL
INSTRUCTIONINPUTLEARNING
MOVEINSTRUCTIONSET
STEPONLYCHANGING
RECT
SUBSET
VALID
LINE
PROHIBIT