Troubleshooting guide

High Speed Ethernet Server Driver

GP-Pro EX Device/PLC Connection Manual

 Device Setting

To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]

window, select the External Device and click [Settings] . To connect multiple External Devices, from

[Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.

 Settings of External Device

Please contact the Yaskawa Electric Corporation for the communication settings of the External Device.

Check the set IP address in the next procedure.

1 Change the security mode to "management mode".

2 Select [NETWORK SERVICE] from [SYSTEM INFO] of main menu.

• Default IP address of the External Device is as follows.

DX100 series: 192.168.255.1

FS100 series: 10.0.0.2

• Check with a network administrator about IP address.

• Do not set the duplicate IP address in the same network.

• Set IP address and Port Number on the External Device in the [Individual Device Settings]

dialog box.

• You need to set IP address on the Display in offline mode.