Troubleshooting guide

High Speed Ethernet Server Driver

GP-Pro EX Device/PLC Connection Manual

3 Communication Settings

Examples of communication settings of the Display and the External Device, recommended by Pro-face, are

shown.

3.1 Setting Example 1

 Settings of GP-Pro EX

 Communication Settings

To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].

• Because it may take some time for file operation processing, "20" (sec.) is specified for a

default of "Timeout."

Even if the External Device does not respond, therefore, it takes 20 seconds until the Timeout

is detected.

Adjust the Timeout value while checking the actual communication status.