Troubleshooting guide

High Speed Ethernet Server Driver
GP-Pro EX Device/PLC Connection Manual
3
1 System Configuration
The system configuration in the case when the External Device of Yaskawa Electric Corporation and the Display
are connected is shown.
 Connection Configuration
• 1:1 Connection
• 1:n Connection
*1 When 33 or more External Devices are connected, it is necessary to check [Increase allowable number of
Devices/PLCs].
"4.1 Setup Items in GP-Pro EX" (page 7)
Series CPU Link I/F SIO Type Setting Example
DX100 DX100 LAN port on the controller Ethernet (UDP)
"Setting Example 1"
(page 5)
FS100 FS100 Ethernet port on the controller Ethernet (UDP)
"Setting Example 1"
(page 5)
DX200 DX200 LAN port on the controller Ethernet (UDP)
"Setting Example 1"
(page 5)
FS100L FS100L Ethernet port on the controller Ethernet (UDP)
"Setting Example 1"
(page 5)
• Available Classes vary depending on the software version of the External Device.
Please contact the Yaskawa Electric Corporation for the more information.
YASKAWA Electric Corporation
Robotics Division
Telephone: [phone]
Facsimile: [phone]
Display
External Device
HUB
Display
External Device
HUB
External Device
Maximum number of External Devices: 64 *1