Troubleshooting guide

High Speed Ethernet Server Driver
GP-Pro EX Device/PLC Connection Manual
21
Binary file (memory)
Binary file (CF/SD/USB)
Address Item Details
+0000 Status
0: Initial value, 1: Run instruction, 16: In-process,
256: Normal completion, 4096: Error
+0001 Line count
Number of lines in the obtained file
Protocol is updated after send is complete.
+0002 Save location 0: Memory
+0003 File type 5: Binary file
+0004 Starting address USER area address for the output destination
+0005 Starting line Ignored (0 reserved)
+0006 Character count Ignored (0 reserved)
+0007
Number of
output lines
Ignored (0 reserved)
+0008 -
+0025
File name
Load file name (Max. 32 characters + extension)
18 Word is reserved.
Overflow digits (Byte units) are filled with 0x00, or 0x00 unnecessary
when inputting maximum character count.
Also used as the file name when saving to CF.
+0026 Folder name Ignored
Address Item Details
+0000 Status
0: Initial value, 1: Run instruction, 16: In-process,
256: Normal completion, 4096: Error
+0001 Line count
Number of lines in the obtained file
Protocol is updated after send is complete.
+0002 Save location 1: CF/SD, 3: USB
+0003 File type 5: Binary file
+0004 Starting address Ignored (0 reserved)
+0005 Starting line Ignored (0 reserved)
+0006 Character count Ignored (0 reserved)
+0007
Number of
output lines
Ignored (0 reserved)
+0008 -
+0025
File name
Load file name (Max. 32 characters + extension)
18 Word is reserved.
Overflow digits (Byte units) are filled with 0x00, or 0x00 unnecessary
when inputting maximum character count.
Also used as the file name when saving to CF.
+0026 Folder name
Path name of save location (Max. 64 characters) Variable length
Set 0x00 at the end of the character string.