Troubleshooting guide

High Speed Ethernet Server Driver
GP-Pro EX Device/PLC Connection Manual
2
Introduction
This manual describes how to connect the Display and the External Device (target robot).
In this manual, the connection procedure will be described in the sections identified below:
1
System Configuration
This section lists the types of External
Devices and SIO that you can connect.
"1 System Configuration" (page 3)
2
External Device Selection
Select a model (series) of the External
Device and its connection method.
"2 External Device Selection" (page 4)
Operation
3
Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
"3 Communication Settings" (page 5)
4
Setup Items
This section describes communication
setup items on the Display. Set the
Display’s communication settings in GP
Pro-EX or in off-line mode.
"4 Setup Items" (page 7)