Troubleshooting guide

High Speed Ethernet Server Driver
GP-Pro EX Device/PLC Connection Manual
14
The address input area is shown below.
• For word addresses
*1 Not used if the command type is robot control (Class other than 0x04C0 to 0x04C3). (0000: reserved)
Device Bit address Word address 32 bits Comments
Class
Instance
Attribute
Control
Bit
Class: 0000h - FFFFh
Instance: 00000 - 16383
Attribute: 00 - 63
Control address: 0000 - 4095
Bit: 0 - 31
Class: 0000h - FFFFh
Instance: 00000 - 16383
Attribute: 00 - 63
Control address: 0000 - 4095
or
*1
*1 The high and low relationship of the stored data varies depending on the External Device. Refer to your External
Device manual for details.
*2
*2 The usable system area designation on the connection device is only the load area size. The usable size for the
load area differs depending on the object designated.
• Please refer to the manual of the External Device for more details of the device. The device
name notation differs in the manual of the GP-Pro EX and the External Device.
• Not supported in sequential address designation / indirect address designation / offset address
designation. Data behavior, when designated, is indeterminate. (The address increment and
changed portion is reflected in Control)
• Please refer to the precautions on manual notation for icons in the table.
"Manual Symbols and Terminology"
GP-Pro EX External Device
Class Command No.
Instance Instance
Attribute Attribute
(0070,00001,01,0000)
Control address
*1
Attribute
Instance
Class