Troubleshooting guide

High Speed Ethernet Server Driver

GP-Pro EX Device/PLC Connection Manual

• For bit addresses

Class

(Command number)

Select the class of the object to send messages. If [Direct Input] is selected,

input a class code of "0000 - FFFF" (hexadecimal).

Instance

(Data array number)

Input the instance number (a decimal from 00000 - 16383) that defines which

class instance receives the message.

Attribute

(Data element number)

Input the value (a decimal from 00 - 63) that defines which attribute of the

instance is accessed.

Control Address Depending on the class, a control address will be needed that instructs the data

target for expansion, etc. In such an event, input the foremost position of the

control address with a decimal from 0000 - 4095.

Only the user area can be designated

For classes that do not require control addresses, this value is ignored.

Bit Number Input the bit position you want to get / write via a decimal (00 - 31) from the

word data designated to the attribute.

• If "Set as Default Value" is checked, when a new address is input the configured value will be

displayed as the default value.