Troubleshooting guide

High Speed Ethernet Server Driver
GP-Pro EX Device/PLC Connection Manual
10
4.2 Setup Items in Offline Mode
 Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in offline mode. Touch the
External Device you want to set from the displayed list.
• Please refer to Maintenance/Troubleshooting Guide for more information on how to enter
offline mode or about operation.
Cf. Maintenance/Troubleshooting Guide "Offline Mode"
• The number of the setup items to be displayed for 1 page in the offline mode depends on the
Display in use. Please refer to the Reference manual for details.
Setup Items Setup Description
Port No.
Enter a port number of the Display, using 1024 to 65535.
Check into [Auto], and a port number is set automatically.
Timeout
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
Retry
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Wait To Send
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.