Operation Manual

19
9 About the Tablet
In this item, you can view the information on law, Tablet status and software version.
Status
To view the status of the battery, power-on time and WIFI address, press Menu/System Settings/
About the Tablet/Status.
Information on law
To view the information on law, press Menu/System Settings/About the Tablet/Information on law.
Model
To view the mode, press Menu/System Settings/About the Tablet/Model. Firmware version
To view the rmware version, press Menu/System Settings/About the Tablet/Firmware version.
Version No.
To view the version No., press Menu/System Settings/About the Tablet/Version No.
9.1 Using HDMI
With HDMI, video contents being played by the Tablet can be transferred to an HDMI monitor (like a
TV set with HDMI port) for playing. The outputs the Tablet supports can offer a maximum resolution
of Full HD 1080P (1920 x 1080 pixels). The related operations are as follows:
1. Power on the Tablet.
2. Connect Tablet to HDMI monitor with HDMI cable (not included) and power on the monitor.
At the time, on the status bar messages about HDMI connection will be popped up.
3. Play the video les on the Tablet.
4. Press MENU, and the Tablet’s screen will turn black, a process lasting about 5 seconds during
which the contents are being switched to HDMI monitor. You may wait with patience.
5. You can transfer the contents to the Tablet again by any of the four ways below:
1) System transfers to Tablet automatically after the playing is completed.
2) Press Menu during playing to switch the video contents to the Tablet.
3) Pull out the HDMI cable during playing, after which the video contents will be transferred to the
Tablet.
4) Press Back to exit the playing mode, after which the video contents will be transferred to the
Tablet.
English
TAB310_manual_syl.indd 19 20-06-11 18:46