SKU #264-1847 24 IN. PUSH/PULL LAWN ROLLER MODEL #LR0006-24M DO NOT RETURN TO STORES PLEASE CONTACT OUR CUSTOMER SERVICE TEAM IF YOU FIND YOU ARE MISSING ANY PARTS, APART IS DEFECTIVE, OR YOU HAVE ANY OTHER QUESTIONS/CONCERNS.
SKU #264-1847 }mfiflWflHKs'" 24 IN. PUSH/PULL LAWN ROLLER MODEL #LR0006-24M READ YOUR OPERATOR’S MANUAL COMPLETELY AND CAREFULLY BEFORE ATTEMPTING TO SET UP OR OPERATE YOUR NEW 24 IN. LAWN ROLLER. ALL OPERATORS OF THIS EQUIPMENT SHOULD READ AND UNDERSTAND ALL SAFETY RULES PRINTED ON THE MACHINE AND IN THIS OPERATOR’S MANUAL BEFORE USE.
TABLE OF CONTENTS Safety Information... Package Contents List... Hardware Contents List.. Preparation Assembly Parts List and Exploded View... O WWW N 45 SAFETY INFORMATION 1. Never attach a garden hose to ths fill/drain hole when filling. Dangerous pressure build up could occur inside roller. . Do not fill teller to maximum weight without checking capability of vehicle to safely pull and stop. . Do not fill roller to a weight greater than you can handle and control comfortably. 2 3 4.
HARDWARE CONTENTS Part Description Quantity Picture (shown full size) @ lonesomeness Hex Lock Nut 1 E @ 10mmx55mmClevisPin Clevis Pin Cotter Pin 3 @ PREPARATION Before beginning assembly or aeration of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble or operate the product. Contact customer service for replacement.
2. Attach the assembled tongue (C) to the folding brackets (B). Secure with one hex bolt (AA) and one 8 mm hex lock nut (BB) in the first hole. Tighten.Then thread one clevis pin {(DD) into the second hole on the folding bracket and secure the end of clevis pin with one cotter pin (EE). * Important! the bolt (AA) is being used as pivot rod, as the tongue (C) can be folded down when the roller is ready for storage. So please make sure the bolt was assembled to the first hole on the folding bracket.
4. If the roller needs to be converted to tow-behind operation, change the position of the handle (D) by referring to GROUP B in step 1. Then attach the hitch bracket on tongue (C)to the hitch plate on the tractor with the clevis pin (CC) and cotter pin (DD) detached from the hitch bracket. Hardware Used Clevis x1 @ cotter Pin Qe x1 CARE AND MAINTENANCE 1. Always clean the lawn roller with damp, soft cloth after each use.
PART LIST AND EXPLODED VIEW Part Description Quantity| Part Description Quantity A Roller Assembly Hex Bolt 1 B Folding Bracket Hex Lock Nut 1 C Tongue Clevis Pin 2 D Handle Clevis Pin 1 E Plug 1 EE |[Cotter Pin 3 Printed in China Customer Service 6 Phone: (877) 443-6432 Email: