Assembly Instructions

6
Parts and Support
Please do not return this product to the
store prior to contacting Precision.
Our goal is to deliver quality, value and outstanding
service. If for any reason our product does not meet
your expectations, please contact us and we will
take care of any problem you may have with this
unit.
When ordering replacement parts please have the
model number, part description, part number,
inspector number and date on carton, available so
that we can best serve you.
1 [phone]
STOP
Operation
 TO DUMP - Pull Latch toward lawn tractor and
Cart Body will tilt back to dump position.
 TO RETURN TO PULLING POSITION - Push down
on front edge of Cart Body until Latch engages
and secures to Tow Bar.
 Tractor speed should be governed by weight of
load. The heavier the load, the slower the speed
for safe operation.
Maintenance Instructions
 Keeping the cart clean and dry will prolong the
unit’s life.
 Grease Wheels at regular intervals, at least once
every six months, more frequently if used
regularly.
 Should rust develop, sand lightly then paint area
with enamel paint.
 Check tire pressure at regular intervals. Proper
inflation will prolong the life of tires (see side of
tire for inflation amount.
Figure 11
Clevis Pin
Clevis Pin
Clip
Figure 9
3/4” Flat
Washer
Cotter Pin
Cotter Pin
3/4” Flat
Washer
1” x 1” Tube Plug
Figure 10
5/16” x 3/4”
Truss Head Bolt
Clevis Plate
Tow Bar
5/16” Lock
Washer
5/16” Hex
Head Nut
11. Turn Cart to an upright position, then attach Tow Bar
to Hitch of tractor, placing Clevis Pin through Clevis Plate
Hole and securing with Clevis Pin Clip. Insert 1” x 1”
Tube Plug into Tailgate Support Tube. See Figure 11.
10. Insert 5/16” x 3/4” Truss Head Bolt into hole of
Clevis Plate, then into hole of Tow Bar. Attach a
5/16” Lock Washer and secure with a 5/16” Hex
Head Nut. Repeat process on second hole in Clevis
Plate. See Figure 10.
3
10 11
17 18
13
16 15
14
12
21
19
20
Shown Full Size
22
Ref.
Qty. Description
10
11
12
13
14
15
16
17
18
19
20
21
22
23
2
8
1
4
1
8
2
6
1
8
1
2
1
6
5/16” x 3/4” Truss Head Bolt
3/8” x 3/4” Truss Head Bolt
1/4” x 3-1/2” Hex Head Bolt
5/16 x 3/4” Truss Head Bolt
1/2” x 1-3/4” Clevis Pin
3/8” Lock Washer
5/16” Lock Washer
5/16” Hex Head Nut
1/4” NyLock Nut
3/8” Hex Head Nut
#14 Hitch Pin Clip
1/8’ x 1-1/4” Cotter Pin
Spring
3/4” Flat Washer
* Hardware Sack may contain more parts than need for
assembly of this unit.