Operator`s manual

Do not cut with a dull, cracked or
damaged metal blade. Before cutting
growth, inspect for obstructions such
as rocks, metal stakes or strands of
wire from fences. If an obstruction
cannot be removed, mark its location
so that you can avoid it with the
blade. Wires can catch on the blade
head and be thrown in the air.
WARNING:
Operating the Brushcutter
Model Nos. 101PBC33, 101PBC33BH
and 101PLT25SS
See Fig. 14
Follow these steps to operate the brushcutter:
1. Remove blade guard from the blade.
2. Start the brushcutter.
3. Hold the brushcutter at waist level with
your right hand (arm extended) on the
trigger handle and your left hand on the
front handle.
4. Place the product on the right side of your
body with the engine behind and away
from your body.
5. Brushcut weeds and vines in a right-to-left
motion with the blade parallel to the ground.
Ensure the blade guard is removed
prior to starting the engine. Failure to
remove the blade guard could cause
the blade guard to detach from the
blade and cause injury.
WARNING:
Operation – continued
WARNING DANGER
DO NOT TOUCH THESE TYPES OF OBJECTS WITH
THE BLADE
METAL STAKES
RUBBER
FENCES
ROCKS
MASONRY
UTILITY WIRES
18
Fig. 14