Owner`s manual

17
W A R N I N G
When servicing, use only identical replacement parts. Use of any other parts may create a hazard
or cause product damage.
W A R N I N G
Always wear safety goggles or safety glasses with side shields during power tool operation or when
blowing dust. If operation is dusty, also wear a dust mask.
W A R N I N G

and disconnect from power supply. Failure to follow these instructions can result in serious personal

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
W A R N I N G

come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic, which

Periodically, clean all foreign material from the trimmer head vents.
You can often make repairs described here. For other repairs, have the trimmer serviced by an
authorized service dealer.
SPOOL REPLACEMENT (See Fig. 12)

best performance.
Unplug the string trimmer.
Push in tabs on side of spool retainer.
Pull spool retainer up to remove.
Remove spool.
To install the new spool, make sure the two strings are captured in the slots opposite each
other on the new spool. Make sure the end of each string is extended approximately 6in beyond
each slot.
MAINTENANCE