Installation Instructions

Planning is Essential
• Consider soil conditions, slopes, utility locations
and property lines when positioning posts.
• Run a string line to locate the fence line and
establish the outside faces of your posts
(See Fig 1.)
• Mark the centers of the post locations for
your fence. The maximum distance between
fence rail posts is 72".
Fig 1. Sample Staking & Post Layout
Included in kit:
Item Product Name Size Qty
4" x 4" Vinyl Post 4" x 4" x 96" 1
A
A B C D E F
4" x 4" Post Cap 4" x 4" 1
B
Rail Bracket 4
C
Screw Length 3/4" 32
D
Fence Panel
*
7-3/4" x 7/8" x 64-9/32" 9
Top & Bottom Rail
*
3" x 5" x 67-5/32" 2
E
F
Stake
String
72"
On-Center
Distance
Post
Belmont Privacy Fence (6 x 6)
Installation Instructions
For SKU# 1728601, 1728701
Required:
• Philips Screwdriver
• Measuring Tape
• String Line, Stakes, Level
• PVC Vinyl Cement (Menards #172-4587)
Optional:
• Power Drill with 1/8" Drill Bit
• Post Hole Digger
• Power Auger
• Safety Glasses
• Concrete or Gravel
Installation Tips:
• Prior to construction, check with your regulatory agency for local code requirements
• Contact your utility company to locate and mark underground lines
• Careful planning and measurement of your fence project is essential, as moving posts
after the concrete sets is extremely difficult
• It is highly recommended to measure the panels prior to setting your posts,
not all panels are the same width (
+
/
-
3/16")
*These components are pre-assembled