Installation Instructions

establish the outside faces of your posts. (Fig.1)
 Stake out the fence posts, locating line, corner, end and
gate posts.
 Mark the centers of the post locations for your fence style
and gate using dimensions from the Post Location Chart
below
Post Location Chart
The following chart summarizes sizes and measurements for posts,
fence sections and gates.
Post Styles.
· There are 3 styles of posts needed to complete your project
(Fig.2&3). Line Posts, Corner Posts and End Posts.(Use End Posts
for Gate Posts).
Make sure you have the correct type and quantity of posts
before proceeding.
Step 2.Set posts
 Dig or auger post holes based on the dimensions in chart
below. Ensure the bottom of the post is set at exactly 24"
below grade for the Ranch Rail style. (Fig.4).