Specification

Product Installation Manual
Installation Notes:
4
Pay attention to electricity!
Do not operate with electricity
2
3
Installation steps
1
Live wire（white）
Neutral wire（white）
Signal wire
5
6
7
The first layer is equipped with long lamp holder with short
tooth connection
The second layer is equipped with short lamp head with long
tooth connection
10+10 Display diagram
9+9 Display diagram
6+6 Display diagram
Product name/model:
There are bumps in the same direction on the corresponding holes of the lamp head, find the direction
to install, install the long lamp head first, and then install the short lamp head
1. Install the light-emitting lamp head as shown in the figure
2. Install the decorative disc as shown in the figure
3. Install the fan blades and fix the fan blades as shown in the figure
4. Plug each PH terminal into the board or use the red and white terminals to wire-to-plug
5. Install the hanging plate
6. Power off and connect the power cord
7. Install the ceiling pan