Product Manual

Figure 6
Figure 7
HOPPER HANDLE COLLECTION BAG
1
2
M8×20 (×2)
M8×20 (×2)
M8 × 20 × 4
6
16 mm
13 mm
18 mm
19 mm
30 mm
32 mm
×
2
2
1
3
Velcro
Adjusting Nut
Discharging Bracket
Align the holes of the handle bar assembly with the holes on the
shredder hopper opening. (See Figure 6 illustration 1) Then, secure
the handle assembly to the hopper opening with the M8×20
bolts, washers, and nuts from Hardware Kit #6 shown in Figure 6
illustration 2.
1. Loosen the adjusting wing nut to set the discharge shoot door.
(See Figure 7 illustration 1)
2. Open the debris bag and slip the opening of the debris bag over
the discharge chute housing. (See Fig. 7 illustration 2)
3. Seal the debris bag opening with the Velcro strap. (See Fig. 7
illustration 3)
11
|
Assembly
36060US25M100_KOHLER.indd 11 2017/10/17 11:06:08