Product Manual
Figure 4
Figure 5
2
1
2
M8 (×3)
1
2
M8×20 (×2)
M8 × 3
4
M8 × 20 × 2
5
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
×
2
2
1
M8×50 (×2)
Figure 3
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
×
2
M8 × 50 × 2
3
CHIPPER CONE
DEFLECTOR
Align the three holes of the chipper intake cone to the three studs
on the rotator disc housing. (See Figure 4, Illustration 1) Secure the
intake cone with the M8 nuts from Hardware Kit#4. (See Figure 4,
Illustration 2)
Align the holes in the deector bracket with the holes in the rotor
disc housing as shown in Figure 5 illustration 1. Secure with two
M8×20 bolts from the Hardware Kit#5.
KICKSTAND ROD
Align the top of the kickstand rod holes with the two holes on the
engine mount plate. (See Figure 3, llustration 1) Use the two M8×50
bolts, at washer, and nuts from Hardware Kit#3 to secure the
kickstand. (See Figure 3, Illustration 2)
10
2-in-1 Chipper
»
Operator’s Manual
Assembly
|
36060US25M100_KOHLER.indd 10 2017/10/17 11:06:06