Instructions / Assembly
KNOW YOUR MACHINE
FEATURES AND CONTROLS
Log Stripper
Split Control Handle
4-Way Wedge
Log Spinner Foot Plate
2-Position Log Cradle
Cylinder
Lifting Handle
Manual Tube
Reservior
Safety Chains
Control Valve
Hydraulic Breather/Dipstick
Beam Lock Bracket
Support Leg
Beam Assembly
2” Ball Hitch Coupler
Hydraulic Pump
Log Table (Optional)
MANUAL TUBE
LOG TABLE (OPTIONAL)
LOG CRADLES
Remove the cap from the manual tube. Align the holes in the
manual tube with the holes in the tow bar. Insert and tighten
bolts and washers. (See
Figure 9
)
Refer to Figures 10 and 11 to install the work table. Remove
the bolts, at washers, and nuts from the inside holes. Move
the log cradle from the incline position to the horizontal
position. Align the holes on the log cradle with the outside
holes on the beam mount. Reinstall the bolts, at washers,
and nuts.
Place the work table over the holes in the log cradle and align
the 4 holes from the work table plate and log cradle. Insert
and tighten the M10x25 bolts, spring washers, at washers,
and nuts.
Reattach the cap.
2. Follow step 1 to assemble the left log cradle. (See Figure 10)
Hold the lifting handle and slowly lower the beam. It will lock
automatically. Double check to make sure the beam bracket
is locked onto the beam.
1.
2.
2.
Lifting Handle
Beam Lock Bracket
M8x20 (x2)
Manual Tube
Cap
M12x35 (x8)
Log Cradle (Right)
Outside Holes
Inside Holes
M10x25 (x4)
Work Table
Outside Holes
Log Cradle (Right)
Inside Holes
M8 X 20 X 2
6
M12 X 35 X 8
7
M10 X 25 X 4
8
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
Figure 8b
Figure 9
Figure 10
Figure 11
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
32
mm
13
mm
16
mm
19
mm
Do not let the beam suddenly drop. Keep hands and
ngers clear of pinch or crush points at all times.
1. Align the holes on the right log cradle to the inside and lower
holes on the beam mounts. Insert the M12x35 bolts, at
washers, and nuts and securely tighten.
15 16
Gas Log Splitter
»
Operator’s Manual
Know Your Machine
||
Assembly