Replacement Part List

Recoil Starter Handle
LOG SPINNER FOOT PLATE
\.\. The foot plate holds the log in place while the wedge
// splits the log.
The
foot plate allows the operator to easily spin a log
in prep
for splitting and allows the log to rotate when
)) splitting instead of causing unnecessary stress on the
beam.
)) It is easy to replace when the grip teeth are damaged.
No repair welding
is required.
2-POSITION LOG CRADLE
)) The log cradles are designed to catch the log after it is split
2-position function -The first positon is to center
)) logs on the beam. The second position provides a flat
surface and worktable on which to put logs.
SPLIT CONTROL HANDLE
The control handle is used to move the wedge up
and down
to split logs. The control handle has three
)) positions: Forward, Neutral, and Reverse. See the
"operation" section for instruction.
MANUAL TUBE
)) Keep manuals safely in the tube.
BEAM LOCK BRACKET
)) The beam lock bracket is used to secure the beam in
the horizontal position.
17 I Know Your Machine
LIFTING HANDLE
)) The lifting handle is included for easy transition from
horizontal
to vertical.
2• BALL HITCH COUPLER
The coupler hitch is at the end of the tow bar and
)) attaches to a tow ball for transportation purposes.
LOG STRIPPER
The log stripper is designed to remove any partially
)) split wood from the wedge. This may occur while
splitting large diameter wood or freshly cut wood.
BEAM ASSEMBLY
)) The U-beam structural design is significantly stronger
than a typicall-beam design.
LOG TABLE (OPTIONAL)
\.\. A log table/platform can be mounted on the log cradle
// directly.
ENGINE ON/OFF SWITCH
)) The engine switch has two positions. OFF- engine will
not start or run. ON -engine will start and run.
RECOIL STARTER HANDLE
)) The handle is used to start the engine.
YU2566PM02- 1703