Use and Care Manual

YS0952PM00 - 2002
Over time your YARDMAX log splitter wedge will dull. If you notice decreased performance, we recommend sharpening the wedge using
a ne-toothed le, smoothing any burrs or crushed areas along the cutting edge. For questions about sharpening the wedge, call us at
844-YARDMAX.
SHARPENING THE WEDGE
The following hydraulic oils or equivalents are recommended for
your log splitter's hydraulic transmission system:
10W AW32
ASLE H-150
ISO 32
Clean the oil drain bolt with dipstick before screwing it
back in. Tighten it to avoid leakage before setting the log
splitter down.
Periodically check oil level to ensure it is between
the two grooves on the dipstick. Refill with oil if it
becomes low.
11
|
Replacing Hydraulic Oil & Sharpening the Wedge