Replacement Part List

This lawn mower was partially assembled at the factory. To assemble your machine follow the below instructions.

ASSEMBLY

HANDLE BRACKETS

Align the three holes in the upper handle bracket with the holes in the

lower handle bracket. Secure and tighten by using M8x20 bolts and

nuts. (See Figure 2)

LOWER CONNECTING HANDLEBARS

Attach the short studs in the lower connecting handlebar into any

one of the three holes in the handle bracket. Align the lower hole in

the lower connecting handlebar with the hole in the bottom of the

handle bracket. Insert the bolts, washers, bushes and secure with

nuts. (See Figure 4)

WHEELS

Assemble the four wheels by securing with four M10 nuts and

washers. ( See Figure 3)

Figure 2

Figure 4

Figure 3

M10 × 4

M8 × 20 × 4

M8 × 35 × 2

The three holes in the handle

bracket are for three different

handle heights. Quickly switch between the three

holes by unlocking the knob, adjusting and then

releasing.

NOTE

X 2

Assembly