Save This ani fe ie Ha YARDMAN 22 in. RWD 3-in-1 Gas Walk Behind Self-Propelled Lawn Mower Operator's Manual MODEL NUMBER YG2760 SERIAL NUMBER PURCHASE DATE L Both model numbers and ina safe place for future Lie, READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING THE MACHINE. FAILURE TO COMPLY WITH THE SAFETY INSTRUCTIONS IN THE MANUAL MAY RESULT IN PERSONAL INJURY.
Your new YARDMAX® lawn coronation cation and is easy and use and care, it gives many years of dependable service, quality h proper wore off + toy operate. W lake on any job with ease, portability, and convenience while experiencing the durability of your new fawn maser! Discover the YARDMAN Advantage AL YARDMAN, we u 5 prov sensibility.
ene Carefully read through this A LE entire operator's manual before using your new unit. Pay attention to off conditions and warnings. Meme. This walk-behind self-propelled lawn mower is intended in be used by resident iris design ily for cutting grass McDowell maintained lawns | properties. i is not designed for cutting rushes or for agricultural uses. i starts easy and cuts cleanly. The efficiency of the culling shyster wain looking spotless and clean.
ene SPECIFICATIONS Model # YG2760 Mower Type Propellant BWD Cutting Ont ions Bag Mulch Side Discharge Cutting Width Maw: Cutting Height 220 Min Cutting Height 1381 Cutting Height Options positions Deck Material Thales Deck Type Rear Bag Capacity Stamper] 12 cuff Bon Engine YARDMAN Power Type Gag Starting System Pull Card Misplacement 201 Engine Torque afb Fuel Tank Rapacity O34 eolian ital) Of Capacity 16.9 02.40.
SYMBOLS The raking plate or yow mu oy shiny Symbols, The: DANGER WARNING CAUTION FAST SLOW Read these instructions carefully, Wear approved hearing protection. Wear eye protection with side shields marked to comply with ANSI ZB7.1. Do not touch parts that are hot from operation. Delete the highlighted line. Add 'H may result in serious burns’ Engine pert, especially the muffler, become extremely hot during operation.
ene epoch signora word, DANGER This symbol points out informant safety Instructions. This machine was built to be operated according to the safe operation practices in this manual. Carelessness or error an the part of the operator can result in serous in fury This making fs capable of amputating fingers, hands, toes, and feet and throwing foreign objects. Failure to observe the safety instructions could result in serious Injury or death.
Dio not operate the machine wheels under the influence of drugs, alcohol, or any medication that cooed affect your ability to use it proper. Wear sturdy, roughhoused work shoes and close-lifting stacks and shirts. Shirts and pants that cover the arms and legs and steel toed shoes are recommended. Never operate this machine in tare feet, sandals, slippery or lightweight (e.g, canvas] stores. Protect eyes, face, and head from objects that may be thrown from the unit.
ene Store fuel in a cool, well-ventilated ares, stately away from sacks, pen flames, ar other sources of ignition. Never store fuel or a machine with fuel in the tan inside » biding where fumes may reach a spark, open flare, of any other source of ignition. such as 5 water heater, furnace, or clothes dryer Allow the engine tu cool before storytelling in any enclosure.
When starting the engine, pull the cord slowly until resistance is felt, then pull rapidly. Rapid retraction of the starter cord {kickback} will pull hand and arm toward the engine faster than vou can let go. Broken bones, fractures, bruises, or sprains could result. If the equipment should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble, his manual cannot include all situations that can occur when yas use the product.
ene CONTENTS SUPPLIED Yong YARDMAN {aver mower contains the following dl 1. Main Machine 2. Side Discharge Chute 3. Grass Catcher 4, Product Adapter Operator's Manual and Engine Manual .
ASSEMBLY. This lawns mower comes assembled and only needs simple unfolding and fastening. Follow the below Instructions: HANDLEBARS 1. Slowly move the folded hang ack to the working position. (ee Figure 2, frustration 1) 2. Unlocking the NBS, attached the short studs. thee hol © any one of in the hardier racket. {See Figure 2, striation 2) ( vl Nero The three holes in the handle bracket are for three different handle heights.
ene Deo not remove side mulch ine start/stop cont: upper handle. bl cover at any time, even when Figure 3, illustration 1) L vou gre not mulching. ENGINE STARTER POSITIONING from the engine ang the o Figure 3, frustration 2} GRASS CATCHER it the mowers 77 Engine Start/Stop Control 7, 7 Figure 3 SIDE DISCHARGE CHUTE the © 1. LEE the rich cover un > wore. (See Figure 4, Ministrations 1} ide the bwo hooks of th hon the leh cover Figure 4 Aspiration 2) discharge cover and i.
KNOW YOUR MACHINE FEATURES AND CONTROLS SE ea De Canto lever Shes Sel Stud er “ Se Suspicious aan yd 13 | Know Your Machine OSTEOPATHY 2308
ene Engine Start/Stop Control The engine start/stop control is attached to the tipper » handier of the mower, Depress and squeeze it against the upper handle to operate the unit, Release it to stop the engine and blade. Side Discharge Chute Your mower is shipped as a moocher. To discharge the grass chippings to the side instead, follow the » instructions on page 12 in the Assembly section to attach the side discharge chute. This engine start/stop control A WARNING is a safety device.
HANDLE HEIGHTS ADJUSTABLE he bandied jit kola pane rein Target i sanditheinrodiey CCI a ie Sine aig dao SIDE DISCHARGE MODE Divan Bsa Figure 9) Handle Bracket Flare BASIC CUTTING PROCEDURE ey shin i brioche Figure 9 ILE Sie grass ante 17.
el he se eee ee Be ee STOPPING THE MACHINE EMBODYING THE GRASS CATCHER ratios ta dap i Donor drag the bay whee A iL YOU empty the grass catcher Wait for the blade stoop A WARNING completely before performing workingwoman the mover : : imprecise £4 destination 1: CR Operation | 18
MAINTENANCE MAINTENANCE SCHEDULE in the maintenance schedule, yx can see which parts of your rice, nod ul wd reaching reg place.
ene couplet Face. {Sex Figure 14). is equipped with a female adapter an its surface ck wash system. Gatecrash io rinse grass clippings from the decks underside and prevent the buildup of corrosive chemicals. Complete fry slugs taller © Lesions 1 the mow far your oh 2. Remus the grass catcher @ rancher door Water, grass and other debris 4 is will drain from beneath the mower housing during the washout process. | = sure the garden hose is not A li po under the loin mower housing or entangled in the wheels.
ENGINE CARE performance ‘5 anal of key engine malevolence obs recurred for goof Ructions. oval as instructed In Erg vary 25 how splendorous Ohioan spark plugs and re replacement ¥s recon 3 « Clean the engine regularly with a cloth or brush, Keep the tine clean to permit proper ovals, dirk, znd combusts debris from the muffler ares Figure 15 n.
ene After draining the used of, rein the menacing to the aerating position ty pos about 374 of the engine capacity of oil into the oft 7. Watt G minutes Tor the off to felt In the engine. 8 Wipe the di 2 ips] stick 10. Read the ail lit an the dipstick.
Figure 19 Use only a replacement CAUTION blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty. J Position the curved ends of iS WARNING the blade to point toward the machine housing. pW 5. ho tall fe new blade, U block of wot bei bes Lia rain mower Thereunder {See Figure 20% Figure 20 To ensure safe operation of a Sn your mower: periodically check the blade bolt for correct torque.
ene CABLE ADJUSTMENT 1 Remove the blade. (See Figure 28) 1. Loosen the jam nut. {See Figure 22, Frustration 2. Rotate the turnbuckle ta Lassen ar tight the cable. {See Figure 22, Illustration 2} 3, Tie rs the jacaranda, {See Figure 22. Customization 3 0 Jam bt ©: Sam Nut 2. Remove the engine p 2x Tum buckle i, ee TIGHTEN LOOSEN “ Figure 22 BELT REPLACEMENT Figure 24 {See Figure 25, Frustration 1) Always keep the air filler A Lh and carburetor facing un levelheadedness fo tip the machine nth its side \.
5. Remove the bel (See Figure 26) lg the nave wheel with whl nub Gee Figure 28) Figure 26 &. Assemble the new bit 7. serviceable the machine in reverse roar REPLACE THE WHEEL 1. Stop the engine make the machine on a fat surface 2. Remove the rut and wh from the wheel i {See Figure 27) sings 15 Front West Figure 28 Make ensure the inner gear a aan ring of the wheel and the gear of the wheel guard are meshed in place. Rear Wheel Figure 29 The following steps should be taken (o prepare wou for storage.
el he se eee ee Be ee spark pig, pour FOLDING HANDLE t surfaces. Sand lightly before > it of TTT TT Clear and lubricate mower | i NOTE thoroughly as described in Maintenance section. Apply a coat of chassis grease: chassis g to mowers cutting blade to prevent rusting. i rm Refer to Engine Operator's | “ Manual for the correct engine storage instructions. i Fielding or unfolding the ee 0 Lee handle improperly can damage the cables, causing an unsafe operating condition.
27 Problem Remedy Hard to start or blowing white smoke Engine runs erratic Engine overheats [des poorly Excessive vibration The mower will not mulch grass Uneven cut Grass catcher not filling Mower will not self propel tipping on the incorrect si Lop he Cola Engine oif level low. 2 Air flow restricted. I parboil ted bd Bach cap Be thane, 1.Cu 2.E i black ent cutting blade, Aer Alas Lane et ere not installed properly. debris clogging drive operation. damaged or worn ee control out of adjustment.
