How to Guide

UPPER HANDLE

Align the holes in the upper handle and the holes in connecting

handlebars to set a comfortable height position for the handle, then

secure and tighten by using bolts and wing knobs. (See Figure 5)

Figure 5

CABLE POSITIONING

1. Hold the engine start/stop control lever against the upper handle.

2. Slowly pull starter rope handle from engine and slip starter rope

into the rope guide.

3. Tighten rope guide knob.

4. Hook the Z-tting of engine stop control cable into the hole in the

engine start/stop control lever.

5. Use cable tie to secure engine stop cable.

Figure 6

× 1

SIDE DISCHARGE CHUTE

1. Lift the mulch cover on the side of the mower.

(See Figure 7

illustration 1)

2. Slide the two hooks of the side discharge cover under hinge pin

on mulch cover assembly. Lower the mulch cover. (

See Figure 7,

illustration 2)

Do not remove side mulch

cover at any time, even when

you are not mulching.

WARNING

× 2

Walk-Behind Lawn Mower

Operator’s Manual

Assembly