So YARDMAN = Walk-Behind Blower Operator's Manual MODEL NUMBER YF1565 SERIAL NUMBER PURCHASE DATE Doth model ember and serial amber may be found lathe wii label. (See Page 2, Figure 1 You should record both of them in a safe place for future use. READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE. FAILURE TO COMPLY WITH THE SAFETY INSTRUCTIONS IN THE MANUAL MAY RESULT IN PERSONAL INJURY.
Your new YARDMASTER walk-behind blower offers quality construction, and is easy and safe to operate. With proper use and care, ibis designed to give you many years of dependable service, Take on any job with ease, portability, vg the durability of your new blower! i convenience while experience Discover the YARDMAN Advantage Kb YARDMAN, we understand that land ownership definitely has its privileges, but it also comes with & deal of responsibility.
ae a J Carefully read through this entire | MODEL AND SERIAL NUMBERS aH ne operator's mud before using For future reference, record both the model number and your pew spit, Pay abstention to ofl the serial number (See Figaro $ as well as date and place of cations aed warnings. J Lo tt purchase. Have this parts, optional warrardyinoguaries, formation ava cries ard whee mal e when ordering ing technical or This machine is a gasoline wer {Eis a durable, versa it is h easy and safe To operate.
SAFETY The delineation below hies the Revel of severity for each slyness word, This symbol points out important safety instructions. This machine ws bull to be operated sailboarding to the safe operation practices in this manual. As with ony type of pacer equipment, carelessness of airs on that part of the aerator pan result in serous Injury, This machine is capable of amputating fingers, hands, toes and feet and throwing foreign objects.
aE a INSPECTOR MACHINE herbivorous machine before starting lH pokes guards landscaped reworking order. Make sure sll nuts, bolts, ele, are securely tightened, Ever operate the machine when i is in need of repair or sin poor mechanical condition. Replace damaged, missing. or failed parts before using it Check for fuel leaks, Neap the machine in safe workingwomen, Dior aes use the machine if the engine's switch does not turn off the engine when running.
SPECIFIC SAFETY RULES Identify hazards and take preventive steps fo avoid accidents and minimize risk. Possible hazards include, but are not Emitted to, moving parts, thrown objects, weight of the machine and proponents, and the gestation environment.
ae a soled byte subcontractor distributes Grandmas qualified series of div moving packs Pate thatching Broken on wor dos that Pantechnicon may stadium parts halt increase or decrease governed ray alert the mischief's operation IF damage ‘or Wor parts Hing engine speed, identified, they should be repaired before use.
ASSEMBLY This walk-behind blower was partially assembled at the factory To assemble your machine follow the below instructions. FRAME Freed the end of the front swivel caster tube into the opening of the frame tube, ard align the holes. Attach the robes to the engine deathblow Dumbo bolt, washer, spring washer aod lock eat in Tow places. Tighten securely using two Homestretches. fee Figure 2} Frost Swivel Caster Robe Figure J VEAL Go hie WHEELS Install one spacer onto the wheel ade.
ae a KIPPER HANDLE THROTTLE CONTROL LEVER 7 Fuhrer ure ban positions fo which N Count the throats Troll To var Gino the right Uppish handle swath & pe handiness can be attached high J MERIT screw and dock nut. Tighten securely using a Smithereens and a Phillips screwdriver. Hook the upper handle Tabs informed holes on the frame tube {See Secure the throttle control cable on the handle with cable clamp. Figure 5, Blusterous. Use the bottom hole for the lower handle {Ben Figured) position.
FLOW ANGLE ADJUSTMENT CONTROL CABLE Attach the 7 type end of the call into the fever as shown. {Ses Figure 7, Strontium 1 Secure the buckle on the cable onto the upper handle. (See Figure 7, Attestation 2} Secure the cable on the frame tube with cable clamp. [See Figure 7, Frustration 3} 1 | Assembly FRONT DISCHARGE CHUTE ™ The front discharge chute is used to | § airs seductive He air dhow fo the front of the blower. Attach it whee needed.
THESE Control Aver Regulate the Spoiled SF angina Mining | I) towards FAST to speed up the engine. Moving towards LOW. gi to lower the engine speed. Flow Angle Adjustment Control Lever Yr Augusts the direction of air flow between 7 positions, Fan Housing 3p Contains the far Intake Guard » Prevents fingers. hands, or large debs from entering the fan housing and contacting the fan blades.
STORAGE OF THE FRONT DISCHARGE CHUTE mum When not iy use, the Tron discharge chute can be stored under the frame at the rer of the Blower Take follow steps to secure the attachment for storage. 4. Orient the attachment so the "THIS SIDE UP FOR STORAGE" Is wp bend the attachment with this direction under the frame of unit. will be supposed by a bracket under the frame. 2.
REGULAR MAINTENANCE CHECKLIST ” The sen doe intervals shown are the mad mum under normal aerating andirons. Increase frequencies under extremely dirty Refer to the engine many! packed separately with your unit for detailed Information ood @ monstrance schedule, or dusty conditions. Interval Hem Service 1. Engine oil level 1. Check Before each use 2. Geneva equipment condition 2. Check 3. Debris ammunition 3.
STORAGE if the walk-behind blower will not be used for a period longer than days, follow the shes below to prepare your unit for storage. 1 Di vain fhe fond tank completely. Stored fuel contains ethanol or BATE, and can start to go stale fn 30 days. Stale ful has high gu nutrient snd can clog the carburetor and restrict fuel flow, Do not use strong detergents or petroleum-hased cleaners when A Bethe cleaning plastic parts. Chemicals con damage plastics. 5. inspect for any loose or damaged parts.
ae a Engine runs erratically Engine overheats fanzine speed does not Crease properly when throttle control is adjusted, Excessive vibration ar nose Spark fig wire Is loose Unit running with choke lever in CLOSE position Blocked fuel line.or stale fuel vent plugged 5. Water or dirt in fuel mystery Foo pe Dirty air cleaner Improper carburetor adjustment = Dirt air cleaner A How estate Carburetor not dissuaded pioneer ly Drabs interfering with throttle linkage.
