Save This Manual for Future Reference YARDMAN &= Power Track barrow with Hydraulic Assist Operator's Manual MODEL NUMBER YDBI0S SERIAL NUMBER L ] PURCHASE DATE Both model number and serial number may be found ante main label. (See Page 2, Figure 1) You should record both of them unsafe place for future use.
Your new YARDMAX® power track barrow offers quality construction, and is easy and safe to operate. With proper use and care, it is designed to give you many years of dependable service. Take an any job with ease, portability, and convenience while experiencing the durability of your new power track barrow! Discover the YARDMAN Advantage At YARDMAN, we understand that land ownership definitely has its privileges, but it also comes with a great deal of responsibility.
before using your new unit, Pay attention to alf : Carefully read through this entire senator's manual citations and warnings. This machine is a gasoline engine driven power track barrow. 1t is a durable, versatile and efficient making, and it is both easy and safe to operate, With proper use and care, it should give you many years of dependable service.
SAFETY GENERAL SAFETY RULES UNDERSTAND YOUR MACHINE Head this manual and labels affixed to the machine to understand its imitations and potential hazards, Be thoroughly familiar with the controls and their proper operation.
Do not tamper with the engine in an effort to get it to runt higher speeds. The maximum engine speed is preset by the manufacturer and is within safety limits. See engine manual, Keep a Class B fire extinguisher on hand when operating this machine in dry areas as a precautionary measure. FUEL SAFETY Fuel is highly flammable, and its vapors can explode ¥f ignited, Take precautions when using to reduce the chance of serious personal injury.
Power Track barrow » Operator's Manual CONTENTS SUPPLIED Your YARDMAN power track barrow comes fully assembled, and the package contains the following: Machine 3.
FUEL SHUT-OFF VALVE “The fuel shut off has two position. » CLOSED (F48) use this position to service, transport, or store the unit, ¥ op En (F8) use this position to run the unit. THROTTLE CONTROL The throttle control regulates the speed of the engine, 3 and moves between Fastenings, SLOW o, and STOP positions. >> The throttle control will shut off the engine when it is moved to the STOP position, CHOKE CONTROL The choke control is used to choke the carburetor and » assist fn starting the engine.
STARTING ENGINE 1. Move the engine switch to the ON position. 2. Open the fuel shut-off valve, 3. Mace the choke lever to the CLOSED position, 1f the engine is hot, %) closing the choke is not Necessary, 4, Flamethrower lever slightly to the FAST speed, 5. Pull the recoil starter until the engine starts. Return the recoil to the home position after cache pull. Repeat the steps as needed.
Power Track barrow » Operator’s Manual STORAGE if the power wheelbarrow will not be used for a period longer than 30 days, follow the steps below 1o prepare your unit for storage. 1. Di rain the fuel tank completely. Stored fuel containing ethanol or MTGE can start (o go stale In 30 days. Stale fuse has high gum content and can clog the carburetor and restrict fuel flow, 2. Start the engine and run until it stops. This helps prevent gum deposits from forming inside the carburetor and possible engine damage.
