Operating Guide

LIFTING / TRANSPORTING
5. Use clean cloths to clean off the outside of the compactor and
to keep the air vents free of obstructions.
6. Pull up the spring bolt and fold up the wheels bracket. (See
Figure 3b, Page 9)
7. Carefully fold the upper handle down. Do not allow control
cables to become pinched or bent. (See Figure 10)
Machine may fall and cause damage or injury if lifted
incorrectly. Lift using handles at base of plate.
Remove the spark plug and drain all of the oil from
the cylinder before attempting to start the unit after
storage.
Do not use strong detergents or petroleum based
cleaners when cleaning plastic parts. Chemicals can
damage plastics.
Figure 10
Figure 11
See technical data for the weight of the machine.
To avoid burns or re hazards, let engine cool before lifting /
transporting machine or storing indoors.
The unit can be lifted by the handles in front and back of the unit.
(See Figure 11)
The unit must be transported in the upright position to prevent
fuel from spilling. Do not allow the machine to rest on its side or
its top.
Secure or tie down unit using the lifting handle to prevent machine
from sliding or tipping over.
Always shut off engine, remove key, and close fuel shut-
off valve when transporting unit on a truck or trailer.
Do not transport machine while engine is running.
17
YC1160PM01 - 1703
|
Storage & Lifting / Transporting
29142US25M101.indd 17 2017/3/20 13:53:22