Use and Care Manual
Use scissors or a knife to cut and remove the straps. Remove the wooden plate in the top. At least two people hold up the package and move
it from the top. (See Figure 1)
UNPACKING THE CONTAINER
Figure 1
1 2 3
Avoid contact with hot fuel, oil, exhaust fumes and hot surfaces.
Do not touch the engine or mufer. These parts get extremely hot
from operation. They remain hot for a short time after you turn
off the unit. Allow the engine to cool before doing maintenance or
making adjustments.
If the machine should start to make an unusual noise or vibration,
immediately shut off the engine, disconnect the spark plug wire,
and check for the cause. Unusual noise or vibration is generally a
warning of trouble.
Use only attachments and accessories approved by the
manufacturer. Failure to do so can result in personal injury.
Keep the engine and muffler free of grass, leaves, excessive
grease or carbon build up to reduce the chance of a re hazard.
Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean after each
use.
Observe proper disposal laws and regulations for gas, oil, etc. to
protect the environment.
When storing machine out of the reach of children and do not
allow persons unfamiliar with the machine or these instructions
to operate it. This machine can be dangerous when used by an
untrained user.
MAINTAINING YOUR MACHINE
Some parts of this machine are made of plastic or rubber and
should be kept away from chemicals.
Never cover the machine while the mufer is still hot.
Do not alter or adjust any part of the chipper shredder or its
engine that is sealed by the manufacturer or distributor. Only
a qualified service technician may adjust parts that increase or
decrease governed engine speed.
To maintain your machine, check for any misalignment or binding
of any moving parts. Parts that are broken or worn down that
may affect the machine’s operation. If damage or worn parts are
identify, they should be repaired before use. Many accidents are
caused by poorly maintained equipment.
8
Chipper Shredder
»
Operator’s Manual
YW7565PM04 - 1710
Safety & Unpacking the Container
|